Idiomas disponibles
Idiomas disponibles
1. GENERAL INFORMATION.
ATTENTION: Make sure to read and understand the present instruction manual before using the machine
This manual provides you with the necessary instructions to start, use, maintain and repair the present
machine.
All aspects as far as the safety and health of the users is concerned have been stated. Respecting all
instructions and recommendations will ensure safety and low maintenance. Therefore, reading this manual carefully is
compulsory for any person responsible for the use, maintenance, or repair of this machine.
As such, reading this manual carefully is compulsory for any person responsible for the use, maintenance, or
repair of this machine.
The Table Saws, model MAGNUM, are designed and manufactured to be used at masonry building sites to cut
porotherm blocks and other construction materials. The cutting tool is a diamond blade powered by an electric motor
and water cooled by a closed-circuit pump. The advance of the disc is carried out manually by means of a handwheel.
Any use other than the machine has been designed for is considered inappropriate and can be dangerous;
therefore, it is expressly prohibited.
It is recommended to always have this manual in an easily accessible place close to where the
machine is being used.
2. GENERAL DESCRIPTION OF THE MACHINE
•
The Table Saws, models MAGNUM 700L and 1000L, are designed and manufactured to be used at masonry
building sites to cut porotherm and concrete blocks, but they can also cut other construction materials as long
as a suitable blade is used. This model is manufactured of high quality materials.
•
The cutting tool is a diamond blade powered by an electric motor and water cooled by a closed-circuit pump.
The moving of the blade is done manually by a transmission and a wheel, built in the cutting head.
•
Thanks to its power and the large diameter of the blade, this machine has been designed to cut with precision
supersized materials.
•
A quick height adjustment of the cutting head can be manually performed by using a lever.
•
The motor is mounted on the cutting head that remains stable when the motor is released. A spring keeps it
balanced and suspended.
•
The cutting head allows cutting different forms. To make longitudinal cuts, the cutting head is to be adjusted
in height and then blocked. To make vertical cuts, the cutting head is to be in a swinging position.
•
The steel chassis avoids vibrations when cutting, assuring an optimal productivity of the diamond blades. The
mono-block frame rests on four wheels, two of which are supplied with brakes to move and inmobilize the
machine with ease.
•
The machine has a water tray made of galvanized steel and has a plug to change the water and clean the
tray. All important elements that are in contact with water are made of galvanized steel.
•
The machine is built in accordance to EC norms.
•
The disk is rotated by means of a silent belt.
•
The blade safeguard has been designed to cool the disk on both sides from the tray or directly from the water
tap, and there is also the possibility of connecting the cooling tap to an external water network. The water
pump starts when the motor does.
4
ENGLISH
