Petsafe PBC17-13338 Manual Del Producto página 8

To Insert and Remove the Battery
Note: Do not install the battery while the Bark Control Collar is on your dog.
1. Align the line on the battery with the
triangle on the Bark Control Collar (A).
2. Use a coin to turn the battery clockwise
until the line points to the "ON" position
if you are putting it on the dog or the
"OFF" position if it is not being put on
the dog right away (B).
3. To remove the battery, turn the battery
anti-clockwise using a coin (C, D).
This Bark Control Collar utilises a replaceable PetSafe
This unique battery is designed to make battery replacement easier and increase
water protection.
A replacement PetSafe
Contact the Customer Care Centre or visit our web site at www.petsafe.com
to locate a retailer near you.
Battery Life
Average battery life is 3 to 6 months, depending on how often your dog barks.
However, due to greater use during your dog's training, your first battery may not last
as long as replacement batteries. To conserve battery life, turn to the "OFF" position
when the Bark Control Collar is not in use.
Three Colour LED
The three colour LED indicator shows good or low battery and indicates Test Mode.
Good battery equals 1 flash every 5 seconds with Green LED. Low battery equals
3 flashes every 5 seconds with the Red LED. If there are no LED lights it is time to
change the battery.
8
Do not attempt to cut into or pry open the battery.
Be sure to discard the used battery properly.
battery (RFA-188) can be found at many retailers.
®
petsafe.com
A
C
battery (RFA-188).
®
B
D