Idiomas disponibles
Idiomas disponibles
Setting up
Assembly/disassembly
♦
Move the ▸ mark on the spray unit
mark on the motor unit . Now, turn the spray
unit
until the ▸ mark on the spray unit
locks into the
mark on the motor unit
♦
Unlock the lock
. Turn the ▸ mark on the
5a
spray unit
to the
unit
to separate the two units.
Choosing/changing the nozzle
Nozzle
1.5 mm nozzle
1.8 mm nozzle
2.2 mm nozzle
2.6 mm nozzle
♦
Undo the union nut
it from the spray unit
♦
Fit the desired nozzle
head
.
♦
Screw the union nut
unit
.
Adding spray material
♦
Unscrew the paint cup
unit
.
♦
To work on a horizontal object, place the riser
pipe
in front, facing the nozzle head
To work overhead, place the riser pipe
back, facing the motor unit
♦
Fill the paint cup
and screw it firmly onto the spray unit
■
6
│
GB │ IE
to the
mark on the motor
Use
Low viscosity
Water-based paints
High viscosity
Oil-based paints
completely and remove
.
onto the nozzle
back onto the spray
from the spray
.
with the spray material
.
Switching the appliance on/off
Working methods
♦
Hold the spray gun at a constant distance from
the object. The ideal spraying distance is
approx. 15 cm.
♦
Work out the best settings by carrying out a test.
♦
Do not switch the appliance on/off over the
spray surface. Rather, start/end the spraying
process approx. 10 cm from the spray surface.
Switching on
♦
Insert the plug into a mains power socket.
♦
To switch the appliance on, pull the trigger
and keep it pulled.
Switching off
♦
To stop spraying, simply release the trigger
♦
When you are finished working, disconnect the
plug from the mains power supply.
Selecting a spray profile
Setting the spray volume
♦
Turn the spray volume adjusting wheel
the desired position:
(–) = minimum spray volume
(+) = maximum spray volume
NOTE
►
We recommend starting at the minimum
setting.
Selecting a jet type
.
♦
Undo the union nut
in the
♦
Turn the protruding parts of the nozzle head
so that they point to the desired symbol on the
spray unit
The appliance has the following settings:
▯ round jet
vertical flat jet
horizontal flat jet
♦
Re-tighten the union nut
.
.
.
PFS 450 A1
.
to
