Parkside PWSAP 20-Li D4 Traduccion Del Manual De Instrucciones Originale página 14

Ocultar thumbs Ver también para PWSAP 20-Li D4:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 152
Package contents
1 cordless angle grinder 20V
1 additional handle
1 blade guard (pre-assembled)
1 protective cover(pre-assembled)
1 roughing disc (pre-assembled)
1 two-hole assembly spanner
1 operating manual
Technical details
Cordless Angle Grinder 20V PWSAP 20-Li D4
Rated voltage
Rated speed
Disc size
Thread size
Battery PAP 20 B3*
Type
Rated voltage
Capacity
Cells
High-speed charger PLG 20 C3*
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT SUPPLIED
PWSAP 20-Li D4
20 V
(DC)
n 3000–10000 rpm
Ø 125 mm
M14
LITHIUM ION
20 V
(DC)
4 Ah
10
230–240 V ~ 50 Hz (AC)
120 W
T3.15A
3.15 A
21.5 V
(DC)
4.5 A
approx. 60 min.
II /
(double insulation)
Noise and vibration data
Noise measurement value determined in
accordance with EN 60745. The A-rated noise
level of the power tool is typically:
Noise emission value
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear ear muffs!
Total vibration value
Surface grinding,
main handle
Uncertainty
Surface grinding,
additional handle
Uncertainty
NOTE
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and can
be used for tool comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
WARNING!
The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration. Try to keep the vibration
loads as low as possible. Measures to reduce
the vibration load are, e.g. wearing gloves
and limiting the working time. Wherein all
states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
L
= 79.5 dB (A)
PA
K =
3 dB
L
= 87.5 dB (A)
WA
K =
3 dB
a
= 14.128 m/s
2
h, AG
K = 1.5 m/s
2
a
= 12.720 m/s
2
h, AG
K = 1.5 m/s
2
GB │ IE
 │
 3
loading