Idiomas disponibles
Idiomas disponibles
en | 4 | SCT 418
2.4
Intended use
The SCT 418 is a calibration device for calibrating ad‐
vanced driver assistance systems.
With SCT 418, calibration boards for the calibration of
front camera sensorscan be aligned in a vehicle-specific
manner.
SCT 418 is positioned by using the
"Bosch ADAS Positioning" software.
Diagnostic software such as "ESI[tronic] 2.0" is needed
for calibrating advanced driver assistance systems.
---
2.5
Foreseeable misuse
SCT 418 is pulled or pushed by the measuring bar to
change the position.
Only move SCT 418 using the alignment frame to
change the position.
The measuring bar or calibration device can be
damaged if the SCT 418 is pulled or pushed by
the measuring bar.
---
SCT 418 is used as a means of transport.
SCT 418 may only be used for alignment of calibra‐
tion boards.
---
The measuring bar of SCT 418 is used for leaning or
sitting.
Only load the measuring bar with calibration boards
(max. 10 Kg).
---
2.6
Prerequisites
Resting surface of the vehicle
• Leveled
• Maximum inclination: 0.1°
• Maximum unevenness: 10 mm
• No direct light exposure
• Adequate lighting
---
SCT 418 resting surface
• The same vertical level as the resting surface of the
vehicle, ±10 mm maximum
• Maximum inclination: 1°
• Maximum unevenness: 5 mm
• No direct light exposure
• Adequate lighting
---
Front camera calibration
1
(1) Area where SCT 418 is set up
(2) SCT 418 resting surface (example)
---
Software "Bosch ADAS Positioning"
We recommend and support the DCU 220 as a
laptop or the ADS 625X tablet for use with the
"Bosch ADAS Positioning" software.
1 689 989 518 | 2022-07-24
• Operating system: Windows 10
• Display resolution: 1024 x 600 pixels or higher
• USB ports: recommended 1 x USB 3.0, min. 1 x
---
Diagnostic software
"ESI[tronic] 2.0" software with information type SD
(control unit diagnosis) to be able to calibrate ad‐
vanced driver assistance systems.
---
2.7
No modifications may be carried out on our products.
Our products may only be used with genuine accesso‐
ries and genuine spare parts. Otherwise, all warranty
claims will be rendered null and void.
---
3.
3.1
---
---
Denomination
Base plate
Column
Indicator bar
Ruler
Alignment unit
Reference board adapter (4x)
Calibration board (2x)
Calibration board (2x)
Calibration board CTA 204-1 (2x)
Calibration board CTA 205-1 (3x)
Support clamp for calibration board
1 681 098 019 (2x)
Alignment frame
Shelf for laptop/tablet
Contact plate
Wheel holder (4x)
Mount for large calibration boards with retain‐
ing bracket (2x), retaining adapter X (2x) and
calibration board retainer T
QR code to initialize the cameras (2x)
USB stick with the "Bosch ADAS Positioning"
software
2
Operating instructions
---
1)
cessories)
5 m
---
USB 2.0
Warranty and liability
Product description
Scope of delivery
The scope of delivery depends on the product
variant as well as the special accessories ordered
and may deviate from the following list.
1)
Quantity depends on ordered part number (partly special ac‐
Order number
1 688 000 373
1 688 020 146
1 683 050 054
1 682 329 111
1 681 032 137
1 687 010 635
1 681 098 014
1 681 098 019
1)
1 688 130 297
1)
1 688 130 349
1 688 040 335
1 688 005 286
1 681 321 379
1 681 320 095
1 688 120 190
1 688 005 291
–
1 687 370 328
–
Robert Bosch GmbH
