Parkside PDSP 1000 E6 Traduccion Del Manual De Instrucciones Originales página 7

Ocultar thumbs Ver también para PDSP 1000 E6:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
Device-specific safety instructions
for compressed air sandblasters
Check the appliance for any possible defects
before use. If the appliance exhibits any faults,
it should not be used under any circum-
stances.
Keep children and bystanders away while
operating the tool. Distractions can cause you
to lose control.
RISK OF INJURY! MISUSE! Do not point the
tool towards people or animals!
Wear a dust mask!
Wear safety goggles!
Wear protective gloves!
Wear suitable protective clothing.
Wear safety shoes!
Wear a safety helmet!
RISK OF EXPLOSION! The compressed air
sandblaster gun should not be used in areas
with gas/open flames/fire/gas-operated
water heaters.
SMOKING PROHIBITED!
Work only in sufficiently ventilated rooms.
Do not use oxygen or any combustible gas as
an energy source.
Never exceed the maximum operating pressure
of 6.3 bar.
WARNING!
KICKBACK FORCES! At high working pres-
sures, kickback can occur which can, under
certain circumstances, lead to danger due to
continuous loads.
4 
GB │ IE
RISK OF INJURY! Disconnect the appliance
from the compressed air source before starting
any repairs or maintenance work and before
transportation.
RISK OF INJURY! Disconnect the appliance
from the compressed air source before refilling
the blasting medium.
NOTE
Please heed the safety instructions provided
by the manufacturer of the blasting medium.
Use only materials that are suited for use in the
compressed air sandblaster gun
quartz sand. This can lead to a dangerous
build-up of silicosis-inducing dust.
Take steps to ensure that others are not incon-
venienced (dust formation).
Ensure that the blasting medium is collected so
that it can be disposed of in an environmentally
friendly manner.
Do not remove any type plates. These contain
important information for the safe operation of
the appliance.
If you are inexperienced with the appliance,
seek training in how to use it safely.
WARNING! TOXIC DUST!
Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity.
CAUTION!
Ensure that the appliance is disconnected
from the air supply when not in use, when
exchanging accessories or during repair
work. The air hose should not be under pres-
sure.
. Do not use
PDSP 1000 E6
loading