Jocel JPIC007476 Manual De Instrucciones página 52

Idiomas disponibles

Idiomas disponibles

− Make sure the bottom of the pan and the surface of the cooking zone are
clean and dry.
3. Adjust heat setting by touching the slider control.
If you don't choose a heat setting within 1 minute, the Induction hob will automatically
switch off.
You will need to start again at step 1.
You can modify the heat setting at any time during cooking
If the display flashes
− You have not placed a pan on the correct cooking zone or, the pan you're using is not
properly centered on the cooking zone.
− The pan is too small or not properly centered on the cooking zone. No heating takes place
unless there is a suitable pan on the cooking zone.
− The display will automatically turn off after 1 minutes if no suitable pan is placed on it.
Locking the Control
• You can lock the controls to prevent unintended use (for example if children accidentally
turning the cooking zones on).
• When the controls are locked, all the controls except the ON/OFF are disabled.
To lock the controls
Touch the key lock controls. The timer indicator will show "Lo".
To unlock the controls
1. Touch and hold the key lock control for a while.
2. You can now start using your hob.
When the hob is in the lock mode, all the controls are disable except the
ON/OFF, you can always turn the hob off with the ON/OFF control in an
emergency, but you shall unlock the hob first in the next operation.
Over-Temperature Protection
Power up
alternately with the heat setting, this means that:
51
Power down
loading