CONVERTING THE GAS TYPE OF OVEN
Replacing the nozzles
Unscrew the nozzle and replace it with a nozzle
which is suitable for the new type of gas (see
"General nozzle table" section).
Adjust the oven burner low flame.
Open the appliance door. Press the control knob for
the oven in and turn it anticlockwise to the maximum
setting 230.
The gas burner will light. Hold the control knob
depressed for around 15 seconds and then release it.
• Close the appliance door. Remove the control knob.
• Through the gas tap opening in the control panel,
loosen the internal setting screw slightly.
EN-16
