1. take the thread off the main pipe process as
follows
a. use a 22mm spanner fasten A
b. use another 24mm spanner loose C, the thread.
c. take one side of the thread
2. connecting the gas （do not use B)
a. hold A with one hand
b. Screw D into A with another hand
c. use a 22mm spanner hold A
d. use another 24mm spanner fasten D
e. you can also hold D and fasten A
At the time of installation, remove one of the plugs
with its respective rubber and install the flex
connector with its corresponding safety seal
EN-12
