Idiomas disponibles
Idiomas disponibles
5-Control pannel
5.11 Dry Level button
Press the button (Fig. 5-12) to set the fi nal moisture
content of the laundry at the end of cycle.
The display is shown below:
Ready to wear
Cupboard
5.12 Childlock button activation
To activate the Child-lock function after a cycle has been
started, press the 2 buttons (Fig. 5-13) for 3 sec. until the
indicator icon lights up. To deactivate press the 2 buttons
for 3 sec. again.
5.13 Hygienic Button
Hygienic function is designed to kill bacteria and mites as well as virus on clothes with high
temperature.
The program setting will automatically change to the
highest drying level and temperature. When the cycle
ends, it will automatically continue drying for another 1.5
hours. For those programs that can add Hygienic function,
when users turn the knob to those programs, the Hygienic
button (Fig.5-14) will half light up to indicate that this function can be added. Only Mix/Cotton
/Babycare /Towel / Bulky / Sports can add this function. When turning to other programs,
Hygienic button will not light up meaning not selectable.
After selecting Hygienic function, this button will keep light on until the drying cycle start.
When entering to the hygienic phase, the button will light up again to indicate users.
5.14 Empty tank indicator
This indicator is designed to remind users the water tank
should be emptied (Fig. 5-15).
Important: Empty the water tank after each drying cycle.
See Empty the water tank section of the manual.
5.15 Display
The display shows the remaining time, the delay time and
other related information ( F ig. 5-16) .
Notice
The remaining time is a default value, this time will be re-calculated depending on
additional program settings and the moisture content of the laundry.
12
Ironing
EN
5-12
Dry Level
5-13
Childlock
5-14
5-15
5-16
