Idiomas disponibles
Idiomas disponibles
MU_029_EN
07/11/18
Operation and
EN
maintenance manual
Rev.0
Page 27 of 35
10 EMC Declaration
The Product has been tested according to EN60601-1-2 standard to ensure correct
electromagnetic compatibility.
Portable and mobile communication appliances can affect the Product. The product should not be
used close to another device and if this is inevitable, the product must be checked to make sure it
is working properly.
The use of accessories other than those supplied/recommended by the manufacturer could
increase the level of emissions and lower the level of immunity of the appliance.
The Product has been designed to be used in the electromagnetic environments described below.
The Responsible Organization or Operator is responsible for making sure the Product is used in a
compatible environment.
Possibility of interferences with nearby appliances
It could occur that if the Product is affected by radiations in the range of 80 MHz – 1 GHz or bursts,
it will no longer respond to the commands both as regards the lamp and the camera.
If this does occur, essential performance will in any case be ensured, but to restore normal
operation it will be necessary to de-energize the master switch.
