Home Decorators Collection 56043 Guía De Uso Y Cuidado página 9

Assembly - Hanging the Fan (continued)
2
Hanging the fan
□
Carefully lift the fan motor assembly (E) up to the slide-on
mounting bracket (A).
□
Insert the ball portion of the ball/downrod assembly (B)
into the socket of the slide-on mounting bracket (A).
□
Turn the ball/downrod assembly (B) clockwise until it is
seated with the tab of the slide-on mounting bracket (A)
aligned with the slot in the ball.
3
Preparing the remote control
NOTE: The remote control has already been paired to the ceiling
fan for your convenience. If you have two of the same model fans
in your home, please follow the steps below to control each fan
independently.
NOTE: The remote control battery will weaken with age and should
be replaced before leaking takes place, as this will damage the
remote control. Dispose of used battery properly and keep the
battery out of the reach of children.
□
Confirm that the power to the fan is off at either the wall switch or breaker box.
□
Remove the battery cover by pressing firmly on the arrow and sliding the cover off.
□
Install two 1.5V AAA batteries (M) (included).
□
Return power to the fan at the wall switch or breaker box.
□
If the remote control doesn't work as normal, press then release the "Learn" button
for 1-2 seconds, located in the remote's battery compartment, within 30 seconds of
turning on the power.
□
If pairing is successful, the blades will begin to spin.
□
Replace the battery cover on the remote control.
1 to 3 mode
□
To use more than one remote control for your fan, press the "Learn" button for 10
seconds and release within 30 seconds of turning on the power. Once pairing is
successful, the blades will begin to spin.
□
Repeat the above process for the remote controls you want to work with this fan.
□
The fan can be only controlled by 3 remote controls maximum at the same time
after "Learning". If you use a fourth remote control to handle the fan, the first
remote control will be replaced.
1 to 1 mode
□
To use only one remote control for your fan, press and release the "Learn" button
for 1-2 seconds within 30 seconds of turning on the power. The "1 to 3" mode will
be cleared and returned back to "1 to 1" mode.
1
0
9
Please contact 1-800-986-3460 for further assistance.
A
B
C
JJ
D
E
1
0
HOMEDEPOT.COM/HOMEDECORATORS