Idiomas disponibles
Idiomas disponibles
Set CTCSS/DCS codes
Press the key
the screen, which means that the TX CTCSS code will be set on the current
channel. Press the UP and DOWN keys on the microphone to select the
desired code.
Press the key again
that the CTCSS code will be set on the current channel. Press the UP and
DOWN keys on the microphone to select the desired code.
CTCSS codes: 62.5 - 254.4, in total 51 groups.
Press the key again
that the DCS code will be set on the current channel. Press the UP and
DOWN keys on the microphone to select the desired code.
DCS codes: 000N - 777I, in total 1024 groups. N is positive code, I is reverse
code. Press V/M key to choose positive code (N) or reverse code (I).
After setting the codes, press any key except the keys
and
to save and exit.
CTCSS Scan
Press the key
the icon
will appear on the screen. Then, press the key
scan mode. When the radio finds a compatible CTCSS signal, it will stop on
that channel for 5 seconds, after which it will resume scanning. Press any key
except for the keys
DCS Scan
Press the key
the icon
will appear on the screen. Then, press the key
scan mode. When the radio finds a compatible DCS signal, it will stop on that
channel for 5 seconds, after which it will resume scanning. Press any key except
to access the CTCSS/DCS menu. The T icon appears on
. The icon
. The icon
to access the CTCSS/DCS menu. Press the same key again,
, UP and DOWN to exit.
to access the CTCSS/DCS menu. Press the same key again,
User manual - 10
will appear on the screen, which means
will appear on the screen, which means
, UP and DOWN
to enter CTCSS
to enter DCS
