Idiomas disponibles
Idiomas disponibles
Installation - Existing Construction(continued)
10
Install the grille with light
Attach the grille by squeezing one spring together and inserting
the springs into the spring guides in the fan housing (A) firstly.
Connect LED wire to the plug in the fan housing.
Then insert another spring and push the grille (B) up against
the ceiling.
Check that the installation is secure and safe from falling objects.
Light Mode Operation
To change to night light mode while using the main light, switch
the wall switch off then back on again within 2 seconds.
To change to main light mode while using night light mode,
switch the wall switch off then back on again within 2 seconds.
NOTE:
If you connect the light and fan on two
separate switches, light and fan will operate
independently. If you connect the light and fan on one
switch, the light and fan will operate as the same time,
preventing the night light from being on without the fan.
Do not connect the fan to a dimmer.
Compatibility
FOR USE WITH DIMMER MODELS:
LUTRON:P-PKG1W-WH-R,STCL-153PH-WH,CTCL-153PDH-WH,DVCL-153PR-WH,MACL-153MLH-WH,TGCL-153PH-WH,MACL-LFQ-WH
LEVITON:R68-06674-P0T,R62-6674-P0W,C22-6672-1LW,R00-RNL06-TW,R11-DSL06-1TW,66DF-10W
TP-LINK:HS220
LEGRAND:RHCL453PNICCV4
For a complete list of compatible dimmers, please visit Homedepot.com
Plug
13
Please contact 1-800-841-1350 for further assistance.
HAMPTONBAY.COM
