Assembly - Attaching The Light Kit; Installing The Glass Shades And Bulbs - HAMPTON BAY 58004 Guía De Uso Y Mantenimiento

Assembly - Attaching the Light Kit

10
Attaching the light kit fitter
assembly
WARNING: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
□
Remove the four screws (QQ) from the switch cup of the
light kit fitter assembly (E).
□
Connect the wires from the light kit fitter assembly (E)
to the wires from the black bracket below the fan motor
assembly (D) by connecting the molded adaptor plugs (PP)
together. Carefully tuck all wires and splices in the switch
cup of the light kit fitter assembly (E).
□
Position the light kit fitter assembly (E) on the black bracket
below the fan motor assembly (D) and align the four holes
in the black bracket.
□
Re-install the four screws (QQ) removed in the the first step
to secure the light kit fitter assembly (E).
QQ
E
RR
NOTE: Notice the location of the fan's reverse switch (RR).
This is the switch used to change the fan's directional
rotation. For more information on the operation of this switch,
see Operating Your Fan on page 13.
D
PP
12
11
Installing the glass shades
and bulbs
WARNING: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
WARNING: Allow the glass shades to cool completely before
removing.
□
Insert the glass shade (I) into the glass holder by carefully
squeezing the steel tensioners on the light fixture socket
together.
□
Gently slide the glass shade (I) over the steel tensioners.
Make sure the glass shade (I) is fully inserted into the
socket for a secure fit. Repeat these instructions for the
remaining glass shades (I).
□
With the power off, install the light bulbs (Max. 14W,
included) (J) into the light bulb sockets.
D
E
I
J