Idiomas disponibles
Idiomas disponibles
Care and Maintenance
WARNING: Disconnect power supply before servicing.
See SAFETY INFORMATION before proceeding. Routine maintenance should be done at least once a year.
Never use solvents, thinner or harsh chemicals for cleaning the fan.
Do not allow water to enter the motor.
Do not immerse metal parts in water.
Troubleshooting
Problem
The fan seems louder than
it should.
The fan is not clearing the
room.
Possible Cause
The CFM is too great.
The damper is damaged or not working properly.
The bend in the duct is too close to the fan discharge.
The fan body is not attached securely.
Solution
Be sure the CFM rating on the fan matches the square
footage of your room.
Check the damper to ensure it is opening and closing
properly. If the damper has become damaged, please call
Customer Service.
Be sure you do not have any sharp bends in the duct closer
than 18 in. to the fan discharge.
Use the recommended size ducting to reduce fan noise.
Be sure the fan is securely attached to the ceiling joists.
Be sure a door or window is slightly ajar or opened to allow
Be sure the CFM rating on the fan matches the requirements
for your room size.
NOTE:
determining if the fan is operating properly. If the fan
clears steam from the room within approximately 15
minutes of completing your shower, then the fan is
operating properly
14
Please contact 1-800-841-1350 for further assistance.
Using a tissue is not the correct method for
.
HAMPTONBAY.COM
