Idiomas disponibles
Idiomas disponibles
TURNING THE KEYPAD SOUND
OFF/ON
Your safe comes with the "Beep" sound
turned on.
You can turn off the "Beep" sound of the
keypad by pressing the
To turn the "Beep" sound on, press the
....
key again.
SELECTING A LOCATION
The safe must be mounted to a wall stud and a
permanent shelf or the floor. For optimal
safety and security, the safe should be installed
in an isolated, dry and secure area.
THE SAFE SHOULD ALWAYS BE KEPT OUT
OF THE REACH OF CHILDREN.
...
key.
SECURING THE SAFE
NOTE: This safe must be mounted to a wall
stud and a permanent shelf or the floor. Failure
to do so will compromise the safety and
security of the safe.
NOTE ON LOCKING THE SAFE: The safe needs to
be in an upright position, as shown in Figure 1
(as shown below), for the locking mechanism
to function properly. Failure to mount the safe
in the correct upright position will compromise
the safety and security of the safe.
Secure the safe to a to a wall stud and a
permanent shelf or the floor, using the predrilled
mounting holes in the safe.
NOTE: The safe must be secured to a wall stud
on one side of the safe. A wall anchor should be
used on the other side. The safe should also be
mounted to a permanent shelf or the floor. Use
the hardware provided or consult your hardware
retailer for fastening hardware for your
particular mounting surfaces.
Place the safe in the desired location and mark
the mounting holes to be used. Move the safe
and drill the appropriate diameter and depth of
pilot holes depending on the type of hardware
being used and the mounting surface.
Secure the safe with the fasteners. (Figure 1)
FIGURE 1
4
16
40716-1705
