Idiomas disponibles
Idiomas disponibles
posed of in household waste. You must dispose of such old electrical and electronic equipment
separately.
– Please check with your local authority about the possibilities for correct dis- posal.
Through separate disposal you send old equipment for recycling or for other forms of re-use. You
will thus help to avoid in
some cases that damaging material gets into the environment.
Disposal of the packaging The packaging consists of card- board and correspondingly marked
plastics that can be recycled.
– Make these materials available for recy- cling.
10. TECHNICAL DATA
Voltage/Frequency: 220-240 V~50 Hz
Power: 2000 W
Cutting speed: 13 m/s
Bar length: 405 mm (16")
No load speed: 7000 rpm
Protection class: II
Oil tank capacity: 350 ml
The specified values are emission values and do not necessarily represent safe workplace values.
Although there is a correlation between emission and immission levels, this cannot be used to infer
whether additional safety meas- ures are necessary or not. Factors which affect the current immis-
sion levels at the workplace, include the type of room, other sources of noise, e. g. the number of
machines operating and other processes taking place in the vicinity. Permitted workplace values
can differ from country to country. This information is designed to help the user to better assess the
dangers and risks.
**) The specified vibration emission value was measured in accordance with a normed test procedu-
re and can be used in order to compare one tool with another. The specified vibration emission
value can also be used for an intro- ductory evaluation of the exposure. The vibra- tion emission
value may fluctuate from the specified value during actual use of the power tool. These fluctuations
will depend on the way in which the power tool is used. Try to keep vibrations to a minimum. One
method of reduc- ing the vibration load is, for example, limiting the length of time you work with the
tool. All parts of the operating cycle must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and times in which it is switched on, but is
running without load).
Appropriate chain oil
NOTICE!
Risk of damage to the device!
Under no circumstances should you use old oil to grease the saw chain! This can cause damage to
the oil pump, saw rail and chain!
Use only special saw chain oils with good adhesion properties. Since the saw chain oil can penetra-
te the environment during opera- tion, biologically-degradable special vegeta- ble-based saw chain
oils should be used.
20
