Idiomas disponibles
Idiomas disponibles
The rear hand guard
The rear hand guard serves to protect the hand against a jumped chain and disturbing branches
and twigs.
Check before starting!
DANGER!
Risk of injury!
The device must only be put into operation if no faults are found. If any part of the device is defecti-
ve, it must be replaced before the next use.
Check the safety equipment and the safe condition of the device.
– Check all parts for their firm fit.
– Check whether there is any leakage.
– Check whether there are visible defects: broken parts, cracks, etc.
– Check the device for correct chain ten- sioning.
– Check the function of the chain brake.
Attaching the extension cable
- item 7
– Plug the unit plug into the connector of the extension cable.
– Feed the extension cable through the strain relief mechanism (13) as shown.
Starting the device
item 8
– Hold the device fast with both hands.
– The hand guard (8) must be folded towards the back.
– Press the switch-on safety lock (11).
– Press the start button (12). The device starts up.
6. USE
12
