Idiomas disponibles
Idiomas disponibles
The saw chain is tensioned correctly if it lies close against the underside of the saw rail and can be
moved easily by hand.
Readjust tension of the saw chain when nec- essary (Re-tensioning the saw chain –p. 16).
If there is sufficient chain greasing, the oil spraying off of the saw chain will form a slight trail.
Checking the chain greasing
NOTICE!
Device damage!
The device may not be used without
sufficient chain greasing. Insufficient
greasing reduces the service life of
the device.
–
Check the oil quantity in the tank.
–
Start the device.
–
Hold the running saw chain approx. 15 cm over a suitable surface for a time (15 s).
Filling up saw chain oil
- P. 5, item 6
NOTICE!
Environmental damage!
Since the saw chain oil can penetrate the environment during operation, biologically-degradable
special veg- etable-based saw chain oils should be used.
– Lay device securely with the tank cover (10) upwards.
– Before opening, clean the tank cover and the filler neck if necessary.
– Slowly open and remove the tank cover.
– Carefully fill up the saw chain oil. Do not spill!
– Read the oil level at the inspection glass (6). .
– Tighten the tank cover by hand.
– If you have spilled any saw chain oil, be sure to wipe it up.
5. OPERATION
Safety equipment
The device has several pieces of safety equipment which reduce the risk of injury when working:
Chain catcher
The chain catcher serves to catch a torn saw chain or one which has jumped out of the guide.
Through regular maintenance of the saw rail and correct and regular tensioning of the saw chain,
accidents of this type can be prevented.
11
