Beko FNE 1000 Manual De Instrucciones página 7

1.1.1 HC Warning
If the product comprises a cooling
avoid damaging the cooling system
and its pipe while using and moving
the product. This gas is flammable. If
the cooling system is damaged, keep
the product away from sources of fire
and ventilate the room immediately.
The label on the inner left
side indicates the type of
C
gas used in the product.
1.1.2 For Models with
Water Dispenser
Pressure for cold water inlet shall
your water pressure exceeds 80
psi (5.5 bar), use a pressure limi-
ting valve in your mains system.
If you do not know how to check
your water pressure, ask for the
help of a professional plumber.
If there is risk of water hammer ef-
fect in your installation, always use
a water hammer prevention equ-
ipment in your installation. Consult
Professional plumbers if you are
not sure that there is no water
hammer effect in your installation.
Do not install on the hot water in-
let. Take precautions against of
the risk of freezing of the hoses.
Water temperature operating in-
mum and 100°F (38°C) maximum.
Use drinking water only.
1.2. Intended Use
This product is designed for home
use. It is not intended for commer-
cial use.
The product should be used to sto-
re food and beverages only.
Do not keep sensitive products re-
quiring controlled temperatures
(vaccines, heat sensitive medica-
tion, medical supplies, etc.) in the
refrigerator.
The manufacturer assumes no res-
ponsibility for any damage due to
misuse or mishandling.
Original spare parts will be provi-
ded for 10 years, following the pro-
duct purchasing date.
1.3. Child Safety
children's reach.
Do not allow the children to play
with the product.
If the product's door comprises a
lock, keep the key out of children's
reach.
1.4. Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies with
EU WEEE Directive (2012/19/EU). This
product bears a classification symbol
for waste electrical and electronic
-
equipment (WEEE).
6
EN
This product has been
manufactured with high
quality parts and materials
which can be reused and
are suitable for recycling.