Tabla de contenido
Idiomas disponibles
Idiomas disponibles
22
EN
Recording
Features
TV/VCR
0000
Downloaded from:
https://www.usersmanualguide.com/
PLAYBACK AND RECORDING FEATURES (cont.)
1
2
3
2
4
5
6
7
8
9
0
4
1
Record One Program While
Watching Another
ENGAGE TV MODE
1
During recording...
● Press TV/VCR. The VCR's VCR indicator goes out. (If
● If you are using the AV connection (
SELECT CHANNEL FOR
– –:– –
VIEWING
2
Use the TV's channel selector to set the channel you
want to watch.
Display Elapsed Recording
Time
RESET COUNTER TO ZERO
1
Before recording starts, press 0000. The counter resets
to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press – –:– – at any time to see the
elapsed time.
All indications corresponding to the current status of the
VCR are displayed for 5 seconds. The counter display
remains on the screen indicating the elapsed time.
Press – –:– – again to remove the display.
● Make sure "SUPERIMPOSE" is set to "ON" (
● The indications are not recorded.
● Each time you press – –:– –, the indication on the
you are using the RF connection (
the output from your VCR, the TV broadcast being
recorded disappears.)
the output from your VCR, change the TV's input
mode from AV to TV.
front display panel will also change as follows:
counter reading = channel number = clock time.
(Channel number is not displayed during playback.)
pg. 4) to view
pg. 4) to view
pg. 18).
Capítulos
Tabla de contenido
