Idiomas disponibles
Idiomas disponibles
ENGLISH
To reduce the risk of injury, only use STANLEY FATMAX
recommended accessories should be used with this product.
Maintenance
Your STANLEY FATMAX corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
WARNING! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
SFMCH900M12
Input voltage
V
DC
No-load speed
min
0 - 1500
-1
No-load beats
bpm
0 - 5500
per minute
Single impact
energy (EPTA
J
05/2009)
Weight
kg
Max. drilling capacity
Concrete
mm
10
(Original instructions)
SFMCH900M22
SFMCH900B*
18
18
0 - 1500
0 - 1500
0 - 5500
0 -5500
2.0
2.0
2.9
2.9
22
22
Steel
mm
Wood
mm
SFMCB201
Battery
Voltage
V
DC
Capacity
Ah
Type
Charger
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
*No Battery or Charger supplied with SFMCH900B unit
Level of sound pressure according to EN 62841:
Hammer mode Emission sound pressure level (L
Hammer mode Sound power level (L
Vibration total values (triax vector sum) according to EN 62841:
Hammer drilling into concrete (a
Chiselling (a
) 9.6 m/s
h, Cheq
Declaration of conformity
The Supply of Machinery (Safety)
SFMCH900 Rotary hammer
STANLEY FATMAX declares that these products described
under "technical data" are in
EN62841-1:2015+A11:2022, EN IEC62841-2-
These products conform to the following UK Regulations:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
18
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
2.0
in Electrical and Electronic Equipment Regulations 2012, S.I.
2.3
2012/3032 (as amended).
For more information, please contact STANLEY FATMAX at
the following address or refer to
22
SFMCH900M12
SFMCH900M22
13
13
30
30
SFMCB202
SFMCB204
18
18
18
1.5
2.0
4.0
Li-Ion
Li-Ion
Li-Ion
SFMCB11
SFMCB12
230
230
18
18
1.25
2
) 90 dB(A), uncertainty (K) 3 dB(A)
pA
) 98 dB(A), uncertainty (K) 3. dB(A)
WA
2
) 13.1 m/s
, uncertainty (K) 1.5 m/s
h, HD
2
2
, uncertainty (K) 1.5 m/s
Regulations 2008
compliance with:
6:2020+A11:2020.
the back of the manual.
SFMCH900B*
13
30
SFMCB206
18
6.0
Li-Ion
SFMCB14
230
18
4
2
