Idiomas disponibles
Idiomas disponibles
4. Installation
Note
• Before mounting the holder, check the installation options in your vehicle. If in doubt, consult the
manual for your vehicle or contact the manufacturer.
• Never apply force when using the product or during installation.
4.1 Suction cup holder
• Remove the protective film from the suction cup.
• Open the locking lever of the suction cup (A).
• Position the holder with the suction cup on a clean, even mounting surface (e.g. glass pane).
• Lightly press the holder onto the desired mounting surface and close the locking lever to fasten the holder.
• After mounting, always check to ensure the suction cup is securely attached.
• To remove the suction cup from the surface, open the locking lever. Then gently pull the flap to completely
release the suction cup.
4.2 Setting angle and tilt
The viewing angle and tilt of the smartphone holder can be continuously adjusted using a ball head.
• Always set the angle and tilt without the terminal device inserted.
• Loosen the clamping screw of the ball head.
• Set the angle and tilt as desired and tighten the clamping screw.
4.3 Inserting and removing terminal devices
• Press the sliders on the right and left sides of the smartphone holder into the housing until you hear and
feel them click into place. This will cause the holding brackets to extend (B/C).
• Insert your terminal device and lightly press it (D). The holding brackets close automatically (E).
Note
• Continually check that the smartphone holder is securely seated and your terminal device is securely
held.
• Use only this universal smartphone holder for your windscreen.
• To remove the terminal device, press the sliders on the right and left sides of the smartphone holder into the
housing until you hear and feel them click into place. Hold your terminal device firmly while you do so.
• The holding brackets open automatically and release the terminal device.
5. Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
6. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the pro
7
