Idiomas disponibles
Idiomas disponibles
8 - Installation
8.6 Using adjustable feet
If the freezer is unstable, the feet can be adjusted: Ro-
tate the adjustable feet according to the direction of
arrow (Fig. 8.4) to turn them up or down:
Turning the feet clockwise raises the appliance.
Turning the feet counterclockwise lowers it.
8.7 Waiting time
To the maintenance-free lubrication oil is located in the
capsule of the compressor. This oil can get through the
closed pipe system during slanting transport. Before
connecting the appliance to the power supply you have
to wait 2 hours (Fig. 8.5) so that the oil runs back into
the capsule.
8.8 Electrical connection
Before each connection check if:
Power supply, socket and fusing are appropriate to the rating plate.
The power socket is earthed and no multi-plug or extension.
The power plug and socket are strictly according.
Connect the plug
8.9 Diagram of Area Light Source
Aluminium alloy cooling frame
Area light frame
Press the buckle to split the
Area light frame and Area
light source
24
to a properly installed household socket.
LED Light
Acrylic lamp
Remove the Aluminum Foil
Tape on both sides of the
Aluminum alloy cooling
frame, and the Aluminum
alloy cooling frame can
be removed
Aluminium alloy cooling frame
LED Light
Acrylic lamp
2 h
Aluminium alloy cooling frame
LED Light
Acrylic lamp
Area light frame
LED Light
Aluminium alloy cooling frame
Split the LED Light and Alu-
minum alloy cooling frame
(double-sided adhesive
connection)
EN
8.4
8.5
