Fiap UVC ACTIVE Instrucciones De Uso página 11

GB
CLEANING AND MAINTENANCE
Attention! Dangerous electrical voltage.
Please note the relevant product videos about
cleaning and maintenance
on our YouTube channel:
https://www.youtube.com/user/FIAPGmbH
CHANGE UVC LAMP –
Only use lamps whose designation and performance data agree with the information
given on the rating plate. For optimal filter performance, change the UVC
lamp after approximately 12,000 hours of operation.
CLEAN QUARTZ TUBE
Check the quartz tube for damage and clean it from the outside with a damp cloth.
Warning: Death or serious injury due to dangerous electrical voltage! Before you reach
into the water, remove the main plug from the power supply before working on the device.
ATTENTION:
The lamp and quartz tube can break and cause cuts. Carefully handle the quartz tube
and lamp. For optimal filter performance, change the UVC lamp after approximately
12,000 hours of operation.
WEAR PARTS
The following components are wear parts and are not subject to the warranty:
Lamp, quartz tube and o-rings; mounting attachment
STORING DURING THE WINTER
Operation of the device is possible if the minimum water temperature of +4 ° C
is maintained. In case of frost, the device must be uninstalled. Carry out a thorough
cleaning, check the device for damage and keep it dry and frost-free.
DISPOSAL
The device must be disposed of in accordance with national regulations. This
device must not be disposed of as household waste. Make the device unusable by
cutting off the cables and dispose of them via the return system provided for
this purpose.
If lamps are included in the device, they must be disposed of using the return
system provided for this purpose.
Ask your dealer.
IMPORTANT!
UV LAMPS
1 1