Idiomas disponibles
Idiomas disponibles
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
6.2
UNFOLD THE LOWER HANDLE
1
1. Pull and turn the handle knobs(1) 90°.
2. Unfold the lower handle(2).
3. Line up the handle knobs in one of the three positions on
the brackets.
4. Turn the handle knobs 90° until they engage the holes in
the brackets.
Make sure that the two handle knobs are in the same
position.
WARNING
Do not damage or pinch the cables when you fold or unfold
the handle.
6.3
INSTALL THE UPPER HANDLE
3
5
5
2
4
1. Align the holes in the upper handle and the lower handle.
2. Put the bolts(5) through the holes.
3. Tighten the knobs(4) onto the bolts(5).
4. Do the same operation on the other side.
2
NOTE
4
English
6.4
INSTALL THE GRASS CATCHER
7
6
1. Remove the mulch plug(8).
2. Remove the side discharge chute(9).
3. Open the rear discharge door(7) and hold it.
4. Hold the the grass catcher(6) by its handle and engage the
hooks on the door rod.
5. Close the rear discharge door(7).
6.5
INSTALL THE MULCH PLUG
7
8
1. Remove the grass catcher(6).
2. Open the rear discharge door(7) and hold it.
3. Hold the mulch plug(8) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door(7).
6.6
INSTALL THE SIDE DISCHARGE
CHUTE
9
9
EN
10
