HIKVISION DS-2TD2136T-15 Guia De Inicio Rapido página 51

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
the corresponding mark or information.
FCC Compliance Statement
Note: This product has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
product generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this product does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Please take attention that changes or modification not
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
EU/UK Compliance Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Directive 2014/30/EU
(EMCD) and Directive 2011/65/EU (RoHS).
Note: The products with the input voltage of within 50
to 1000 VAC or 75 to 1500 VDC comply with Directive
2014/35/EU (LVD), and the rest products comply with
Directive 2001/95/EC (GPSD). Please check the specific
power supply information for reference.
This product and - if applicable - the supplied
accessories too are marked with "UKCA" and
comply therefore with the following
directives: Electromagnetic Compatibility
Regulations 2016, Electrical Equipment (Safety)
Regulations 2016, the Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012.
Directive 2012/19/EU (WEEE Directive):
Products marked with this symbol cannot
be disposed of as unsorted municipal waste
in the European Union. For proper
recycling, return this product to your local
supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection
points. For more information see:
www.recyclethis.info.
According to the Waste Electrical and Electronic
Equipment Regulations 2013: Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the United Kingdom. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more
information see: www.recyclethis.info.
Directive 2006/66/EC and its amendment
2013/56/EU (Battery Directive): This
product contains a battery that cannot be
disposed of as unsorted municipal waste in
the European Union. See the product documentation
for specific battery information. The battery is marked
with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or
to a designated collection point. For more information
see: www.recyclethis.info.
According to the Batteries and Accumulators (Placing
on the Market) Regulations 2008 and the Waste
Batteries and Accumulators Regulations 2009: This
product contains a battery that cannot be disposed of
as unsorted municipal waste in the United Kingdom.
See the product documentation for specific battery
information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated
collection point. For more information see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003(B)
standards requirements.
Safety Information
Please read all the safety information carefully before
using.
Laws and Regulations
In the use of the product, you must be in strict
compliance with the electrical safety regulations of
the nation and region.
Transportation
● Keep the device in original or similar packaging
while transporting it.
● Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to
return the device to the factory with the original
wrapper. Transportation without the original
wrapper may result in damage on the device and
the company shall not take any responsibilities.
● DO NOT drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Power Supply
● Please purchase the charger by yourself. Input
voltage should meet the Limited Power Source with
12 VDC, or PoE (802.3af) according to the IEC62368
standard. Please refer to technical specifications for
detailed information.
● Make sure the plug is properly connected to the
power socket.
● The socket-outlet shall be installed near the
equipment and shall be easily accessible.
● DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
● DO NOT touch the bare metal contacts of the inlets
after the circuit breaker is turned off. Electricity still
exists.
● + identifies the positive terminal(s) of equipment
which is used with, or generates direct current. -
3
loading