Idiomas disponibles
Idiomas disponibles
Adjust ing t he front and
rear fader
1
Press (SOURCE) to select a source (tuner,
CD, or M D).
2
Press (SOUND) repeatedly until " F " for
the front speakers or " R " for the rear
speakers appears.
3
Press either side of (SEEK/AMS) to adjust
the volume of front/ rear speakers.
4
Press (MENU) tw ice.
After three seconds, the display returns to
the normal playback mode.
Adjust ing t he cut -of f f requency
and t he out put volum e level f or
t he f ront /rear speakers
To match the characteristics of the installed
speaker system, you can adjust the output
volume level and the cut-off frequency of the
speakers.
Cut-off frequency
1
Press (MENU) .
2
Press either side of (DISC/PRST)
repeatedly until " Front HPF " or
" Rear HPF " appears, then press (ENTER) .
24
Downloaded from:
Frequency (Hz)
https://www.usersmanualguide.com/
3
Select the desired frequency and level.
1 Press either side of (SEEK/AMS) to
select the cut-off frequency.
Each time you press (SEEK/AMS), the
frequency changes as follows:
off y 78 Hz y 99 Hz y 125 Hz y
157 Hz y 198 Hz
2 Press either side of (DISC/PRST) to
adjust the volume level .
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
4
Press (MENU) tw ice.
When the effect setting is complete, the
normal playback mode appears.
Tip
When you low er t he volume all t he w ay dow n,
" ATT" appears and t he cut -of f f requency is
disabled.
