Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Audio mixer
These brief instructions give a quick overview of
how to use the audio mixer . They are intended
for users with basic knowledge of audio tech-
nology . Please read these instructions carefully
prior to operating the unit and keep them for
later reference .
1 Applications
This mixer can be used in many ways to mix
audio signals (microphones, instruments, units
with line level) . The sum signal is output via the
output jacks M L, M R (6), and the USB port (27) .
The USB port is also used as an input for audio
data when the mixer is connected to a com-
puter and for the integrated audio player to re-
play MP3, WAV and WMA files from a USB flash
drive . In addition, the audio player is equipped
with a Bluetooth module .
2 Safety Notes
The mixer corresponds to all relevant directives
of the EU and is therefore marked with
WARNING The unit uses dangerous mains
voltage . Leave servicing to skilled
personnel;
may result in electric shock .
•
The unit is suitable for indoor use only . Pro-
tect it against dripping water, splash water
and high air humidity . The admissible ambient
temperature range is 0 – 40 °C .
•
Do not place any vessel filled with liquid on
the unit, e . g . a drinking glass .
•
Immediately disconnect the unit from the
mains socket,
1 . if the unit or the mains cable is visibly dam-
aged,
2 . if a defect might have occurred after the
unit was dropped or suffered a similar ac-
cident,
3 . if malfunctions occur .
In any case the unit must be repaired by skilled
personnel .
•
For cleaning only use a dry, soft cloth; never
use water or chemicals .
.
inexpert
handling
•
No guarantee claims for the unit and no liabil-
ity for any resulting personal damage or mate-
rial damage will be accepted if the unit is used
for other purposes than originally intended,
if it is not correctly connected or operated,
or if it is not repaired in an expert way . Like-
wise, no liability will be accepted for data loss
caused by a defect or operating errors and for
any consequential damage of this data loss .
If the unit is to be put out of operation
definitively, take it to a local recycling
plant for a disposal which is not harm-
ful to the environment .
2.1 Conformity and approval
Herewith, MONACOR INTERNATIONAL de-
clare that the Bluetooth module in the units
MXR-40PRO, MXR-60PRO, MXR-80PRO and
MXR-120PRO complies with the directive
2014 / 5 3 / EU . The EU declarations of conformity
are available on the Internet:
www .img-stageline .com
The Bluetooth module is generally approved
for operation in EU and EFTA countries; it is
licence-free and requires no registration .
3 Overview
The mains jack 230 V~ / 50 Hz for connection to
a mains socket and the POWER switch are lo-
cated on the rear side of the unit .
1 Combined input jack MIC / LINE for micro-
phones (XLR jack) and audio sources with
line level (6 .3 mm jack)
2 Input LINE (6 .3 mm jacks) of the stereo chan-
nel for units with line level
When connecting a mono unit, only use the
jack L / MONO . Thus, the signal will internally
be routed to the right channel and the left
channel .
3 Output AUX for the send way AUX
4 Input RETURN to connect the output of an
effect unit or of an additional Line audio
source; use the control RET (18) to add the
input signal to the sum signal
5 Jack H . P . (headphones) for headphones
6 Stereo outputs M L, M R (6 .3 mm jacks) for
the sum signal
9
Tabla de contenido
