AEG BEK435E20M Manual De Instrucciones página 19

Ocultar thumbs Ver también para BEK435E20M:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 111
Step 7
Hold the door glass panels by their top edge
and carefully pull them out one by one. Start
from the top panel. Make sure the glass
slides out of the supports completely.
Step 8
Clean the glass panels with water and soap. Dry the glass panels carefully. Do not clean the glass
Step 9
If the door is installed correctly, you will hear a click when closing the latches.
Make sure that you put the glass panels (A and B)
back in the correct sequence. Check for the symbol /
printing on the side of the glass panel, each of the
glass panels looks different to make the disassembly
and assembly easier.
When installed correctly the door trim clicks.
Make sure that you install the middle panel of glass in
the seats correctly.
12.4 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
panels in the dishwasher.
After cleaning, install the glass panels and the oven door.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
A
B
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
Put a cloth on the bottom of the cav‐
A
B
Step 3
ity.
ENGLISH
19
loading