Idiomas disponibles
Idiomas disponibles
WARN IN G
Personal Injury and Product Damage
Hazard
· When any abnormality/ failure occurs,
stop using the product immediately and
disconnect the pow er plug.
· DO N OT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
5. Press the O n/ O ff button to turn the
vacuum cleaner on.
6. O nce you have completed vacuuming,
press the O n/ O ff button; unplug the
power cord plug from the outlet.
UPRIGHT MODE
N OTE:
M ake sure the vacuum cleaner
is completely assembled. Do not operate
vacuum cleaner without dust bag in place.
1. Release the handle by placing foot on
the nozzle and pull back to change
handle position.
POWER CORD - RELEASE & USE
OPERATION MODES
7. To restore power cord after use, turn
upper cord hook to the upright position.
Then wrap cord loosely around cord
hooks.
WARN IN G
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage.
2. Turn on the vacuum cleaner by pressing
the O n/ O ff button for cleaning bare
floor.
N OTE:
Your vacuum cleaner has two
cleaning modes: one dedicated for bare
floor and one for carpets. The vacuum
turns on in carpet cleaning mode, which
means the brushroll is spinning. To switch to
bare floor mode, simply press the Brushroll
O n/ O ff button to turn the brushroll off.
W e do not recommend vacuuming with the
brushroll on when cleaning bare floors as
this may damage your floor.
- 11 -
O n/ O ff
Button
