Zwilling ENFINIGY 53104-9 Manual De Instrucciones página 20

Operation
Operation
20
1 Fitting the blender attachment
Make sure you have unplugged the power plug from the
socket.
Plug the drive unit and blender attachment together with the
arrow on the drive unit pointing to the open lock on the blender
attachment (1.). Twist the drive unit and blender attachment in
opposite directions until the arrow is pointing to the locked lock
(2.) and you feel the blender attachment engage.
1. 1.
2 Setting the blending speed
Make sure the blender attachment is engaged, and plug the
power plug into the socket.
You can set the blender speed in 9 stages via the rotary switch.
For each speed stage, an additional light dot appears in the
display. Turn the rotary switch until you have set the desired
speed.
– –
2. 2.
+ +
EN
1 0
9
8
7