Description; Purpose; Overview; Packing List - Powerworks P24HG Manual Del Operario

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used for：
• Shrinking of shrink tubing, packaging and electrical
components.
• Deforming of articles made from acrylic, PVC, and
polystyrene tubing, plates, and profiles.
• Welding of thermoplastic polymer, flooring materials
of PVC and linoleum, PVC-coated fabric, wallpaper,
tarpaulins and foils.
• Soldering of tin, special silver solder, SMD elements,
cable lugs, and for loosening soldered connections.
• Paint removal. Removal of old coatings of oil paint,
varnish, and synthetic plaster.
• Drying of color shade samples, filter, adhesives,
construction joints and stucco forms.
• Joining adhesives. Large surface gluing with contact
adhesives, activation of pressure, or heat sensitive
adhesives, acceleration of bonding processes, releasing of
bonding points as well as releasing or bonding of edge
bond or veneer.
• Defrosting of icy stairs and steps, door locks, trunk lids,
car doors or metal water pipes.
1.2

OVERVIEW

Figure 1
Sleeve
1
Air Outlet
2
LED Light
3
Trigger
4
Lock out Button
5
Handle
6
1.3

PACKING LIST

1 Heat gun
2 Nozzles (Flat, Hook,
Reduction)
2

INSTALLATION

2.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine before
use.
English (Original Instructions)
Hanger
7
Air Intake
8
Flat Nozzle
9
Hook Nozzle
10
Reduction Nozzle
11
3 Manual
WARNING
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
2.2

INSTALL THE BATTERY PACK

Figure 2
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, understand, and follow the instructions in the
battery and charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
2.3

REMOVE THE BATTERY PACK

Figure 2
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
2.4

INSTALL THE NOZZLE

Figure 3
1. Install the nozzle into the machine.
2. Make sure that the nozzle is in place.
2.5

REMOVE THE NOZZLE

Figure 4
1. Rotate the sleeve (1) in the direction shown in the figure.
2. The nozzle falls off automatically.
4