To Remove The Cutting Deck - Husqvarna R 418TsX AWD Manual De Usuario

8. Align the cutting deck to the equipment frame.
9. Push the cutting deck into the equipment frame
forward until it stops.
10. Push the lock handle down.
11. Set the lift lever for the cutting deck in the transport
position.
880 - 009 - 31.10.2022
12. Move the weight transfer lever down to engage the
weight transfer.

To remove the cutting deck

WARNING:
the weight transfer function must be set to
off when you change accessories.
1. Do the steps 1–7 in
page 104 .
2. Pull and hold the lock handle.
3. Hold the front edge of the cutting deck and pull
forward while you hold the lock handle. Pull the
cutting deck to the end position.
Note:
If you cannot pull the cutting deck to its end
position, release the lock handle and pull it up again.
4. Pull and hold the lock handle and lift the front of the
cutting deck until it releases. Lift until the front of the
cutting deck is released from the equipment frame.
5. Pull the cutting deck out.
To prevent crush injuries,
To attach the cutting deck on
105