Wireless Remote Control - Zzipp ZZBUBBLE Manual De Ususario

MENU' MAP
Ready To Work
Interval Set
Duration Set
Bubble
Haze Output
Fan Speed
LED Color
DMX Address
Clean Mode
Language
Under Timer or Volume Mode, the working status is based on bubble output, haze output, Fan
Speed and LED color set by the LCD control board.

WIRELESS REMOTE CONTROL

Plug the wireless receiver into the bubble fogger 5-pin port labeled "REMOTE CONTROL".
There are 2 buttons on the wireless remote transmitter which act as triggers.
Function of the remote buttons are:
Button A: ON
Button B: OFF
When use wireless remote controller, the working status is based on bubble output, haze
output, Fan speed and LED color set by the LCD control board.
6
After about a minutes heating, it will show this page
Press UP or DOWN button to set interval of TIMER mode 5~200s
Press UP or DOWN to set duration of TIMER mode 5~200s
Press UP or DOWN to set Bubble output ON /OFF
Press UP or DOWN to set haze volume 1% ~ 100%
Press UP or DOWN to set fan speed 1% ~ 100%
Press UP or DOWN to select color
Red\ Green\Blue\Amber\Yellow\ Sky blue\Purple\ White\ RGBA
Fade\ All
Fade\ RGBA Scroll\ All Scroll
Press UP or DOWN to set DMX address 1 ~ 512
Press UP or DOWN to set cleaning mode ON/OFF
(When cleaning mode is ON, it will override all the other functions.
Default cleaning time is 1 minute without turning of the mode
manually.)
PressUP or DOWN to select language
English/Chinese