Zzipp ZZBUBBLE Manual De Ususario página 4

SETUP
The machine has a fixed voltage power supply and can work with an input voltage of AC
110V—120V, 50/60Hz or AC220V—240V,50/60Hz, depending onthespecific model.
To determine the product's power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product's back panel,
or refer to the product's specifications chart. The listed current rating indicates the
product's average current draw under normal conditions.
This product is equipped with a resettable breaker.
If the breaker trips, all sections of this product will lose power.
• Remove the power cord from mains power.
• Allow unit to cool for 15 minutes.
• After 15 minutes, you may attempt to reset the breaker by pressing the button with
your finger.
• Plug the product's power cord into the power outlet and continue using as
recommended.
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
For safety reasons, we do not recommend mounting the product in any capacity. Operate
the product while it is on the ground only, and make sure there is adequate room for
ventilation, configuration, and maintenance.
DO NOT MIX BUBBLE FLUID AND FOG FLUID!!!
FOR BUBBLE
FLUID ONLY
4
FOR SMOKE
FLUID ONLY