Setup Menu; Manual Control - Zzipp ZZFMLOW3000 Manual De Usuario

SETUP MENU'

The setup menu is used to adjust the different parameters of the
fogger.
1. The [MENU] button id used to browse the options of the
setup menu:
2. [DMX512 Add] press the p/q-buttons (13+14) to adjust the
DMX-address.
3. [FAN SPEED xxx%] press the p/q-buttons (13+14) to adjust
the fan speed (1-100%) while the fogger is used in manual or
in timer mode.
4. [VOLUME OUT xxx%] press the p/q-buttons (13+14) to
adjust the output volume (1-100%) while the unit is used in
manual / timer mode.
5. [INTERVAL SET xxxs] press the p/q-buttons (13+14) to adjust the interval time
(10s—>200s) while the fogger is used in timer mode.
6. [DURATION SET xxxs] press the p/q-buttons (13+14) to adjust the fog duration time
(10s—>100s) while the fogger is used in timer mode.
CONTROLLED VIA DMX
Connect the unit to the DMX-line or use the WTR-DMX DONGLE for a wireless DMX setup.
The DMX led (11) should be lit to indicate that a DMX-signal is received.
Press the [MENU] button until the DMX address appears on the display
Use the p/q buttons to set the desired DMX address.
The unit uses 2 DMX channels:
Channel 1: fan speed
Channel 2: volume control
CONTROLLED VIA INTERNAL TIMER
In this mode the fogger is not connected to a DMX-controller.
• First set the fan speed, volume, interval & duration time (see "setup menu" points B to E)
• Press the [X STOP]-button (15) to be sure that the fogger is in STOP mode.
• Press the [TIMER/p]-button (13) to start the timer function.
• Press the [X STOP]-button (15) to stop the timer function.

MANUAL CONTROL

In this mode the fogger is not connected to a DMX-controller.
• First set the fan speed & output volume (see "setup menu" points B to C)
• Press the [X STOP]-button (15) to be sure that the fogger is in STOP mode.
• Press the [VOL/q]-button (14) to start the manual working mode.
• Press the [X STOP]-button (15) to stop the manual working mode.
6
(000-005: fan off
(000-005: no output
006-255: fan speed 1-000%)
006-255: volume 1-000%)