How To Program The Automatic Lock-Relase (Doctor Mode); Reset Programming Art. Ex-7000H; Range Programming Art. Ex-7000H - Comelit HFX-700B Manual Tecnico

Ocultar thumbs Ver también para HFX-700B:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4.2.3.5 HOW TO PROGRAM THE AUTOMATIC LOCK-RELASE (DOCTOR MODE)

Example:
key
Take note of the S1 setting and restore it when programming is complete
1
Enter programming mode
„ Set S2 DIP switch 5-6 to the combination 01
» the Privacy LED flashes
2
1. Choose the function: refer to the
combination in which the automatic lock-relase (Doctor Mode) (D) is listed for the keys you wish
to program.
2. Addressing:
„ for Automatic lock-relase don't set S1 DIP switches
Select the key to be associated with the function
„ Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
3
Select the key to be associated with the function
„ Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4
Exit programming mode
„ To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the Privacy LED switches off
5
When programming is complete,
„ Set S2 DIP switches 1-2-3-4 to the combination 1111 (PROG setting). In this DIP switch
setting, the keys control the programmed functions; the NON-programmed keys control
functions referred to on line 0000, see
„ Restore the user code setting on S1.

4.3 RESET PROGRAMMING ART. EX-7000H

Factory settings:
• Button functions for the S2 DIP switch 1-2-3-4 combination;
• Intercom address absent;
DIP OFF
• Range function and min./max. addresses absent;
• Ringtone reset.
Take note of the S2, S1 setting and restore it when programming is complete
1)
DIP ON
ON
S1
1 2 3 4
5
6 7
8

4.4 RANGE PROGRAMMING ART. EX-7000H

Take note of the S2, S1 setting and restore it when programming is complete
Range minimum
address
S1
Range maximum
set code,
address
"Preset function table"
"Preset function table"
Carry out steps 1 to 3
ON
S2
1 2 3 4
5
6 7
1)
2)
ON
ON
S2
1 2 3 4
1 2 3 4
5
6 7
8
"TABLE A" on page
25.
and select a S2 DIP switches
2)
8
Carry out steps 1 to 4
3)
5
6 7
8
ON
1 2 3 4
5
6 7
8
Example: 0110
ON
1 2 3 4
5
6 7
8
ON
1 2 3 4
5
6 7
8
ON
1 2 3 4
5
6 7
8
ON
1 2 3 4
5
6 7
8
3)
5 sec
4)
ON
S2
1 2 3 4
5
6 7
8
23
Tabla de contenido
loading

Tabla de contenido