Running A Cycle - SciCan STATIM 2000 Manual Del Operador

4.8 Running a Cycle

To operate each cycle, follow these steps and watch the LCD.
Turn the power switch at the back of the unit to ON. The LCD Display reads:
Press the appropriate cycle button on the keypad.
The display will read:
[CYCLE YOU SELECTED]
[CYCLE PROFILE]
Once the start button has been pressed, the amber indicator light comes on to indicate
that the cycle is in progress. During the cycle, the phases of the cycle will be displayed similar to:
Example only.
[ CYCLE YOU SELECTED ]
A
CONDITIONING
B
PRESSURIZING
C
D
E
CYCLE COMPLETE
PRESS STOP TO RESET
As the cycle progresses, the cycle stage and temperature of the chamber are displayed.
During sterilization, the pressure of the chamber and the time remaining for that stage is also displayed.
During the air drying phase, the time remaining is displayed.
Message will vary depending on the cycle choosen.
SciCan Ltd. Instructions for Use
and
then
[ CYCLE SELECTED ]
CYCLE NUMBER
STERILIZING
VENTING
[CYCLE YOU SELECTED]
F
AIR DRYING:
[ CYCLE YOU SELECTED ]
PRESS START
XXXXX
WARMING UP
[ CYCLE YOU SELECTED ]
[ CYCLE YOU SELECTED ]
[ CYCLE YOU SELECTED ]
[ CYCLE YOU SELECTED ]
30:00
CYCLE COMPLETE
REMOVE CASSETTE
15
14:23 3/11/2001
SELECT A CYCLE
LENGEND
A) Warming up
B) Conditioning
C) Pressurizing
STATIM 2000/5000 Cassette Autoclave Operator Manual
D) Sterilizing
E) Venting
F) Air Drying