Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Instructions for Use
4.1 STATIM 2000 — Using the Cassette
When removing the cassette after a cycle, exercise caution as the metal
areas will be hot and the cassette may contain hot steam.
To open the cassette:
1.
Hold the cassette handle with your thumbs facing inward on the
cassette latch.
2.
Push downward on the cassette latch.
3.
Raise the cassette lid upwards and disengage the hinge.
4.
Rest the lid on its outer surface.
To close the cassette:
1.
Align the hinge tab on the cassette lid with the hinge slot on the
rear of the bottom tray.
2.
As you begin to close the lid, the hinge tab and slot will engage.
Inserting the cassette into the STATIM 2000:
1.
Place the end of the cassette into the unit.
2.
Gently push inward until you hear a "click" sound.
Never push the cassette into the STATIM with force as the interior
components could be damaged.
Removing the cassette:
1.
Grasp the handle with two hands and pull away from the unit.
2.
Pull the cassette clear of the unit and set down on a firm surface.
Disengaging the cassette
When not in use, the cassette should be disengaged.
To disengage the cassette, grasp the handle and pull the cassette out until
there is a 15 mm to 20 mm (½ to ¾") gap between the front of the STATIM
2000 and the cassette handle.
STAT-DRI
Treatment of the interior surfaces of the cassette with the STAT-DRI
drying agent, provided with your unit, will enhance the drying process.
(Replacement bottles are available from SciCan, order number 2OZPLUS,
8OZPLUS, 32OZPLUS).
SciCan Ltd.
Instructions for Use
9
STATIM 2000/5000 Cassette Autoclave Operator Manual
Cassette Latch
Figure 8
Tabla de contenido
