Assembling - Optika Italy SZR Serie Manual De Instrucciones

8.

Assembling

1. Put the microscope base ① flat on the workbench. (Fig. 1)
2. Align the holes of the connecting plate ② of the stand column
with the holes of the microscope base.
3. Use the provided fixing screws to connect the base and the
column firmly.
4. Insert the zoom body dovetail ③ into the dovetail of the focus
system ④. (Fig. 2).
5. Lock the fixing screws ⑤.
6. Install the fluorescence epi-illuminator by aligning the round
dovetail of the illuminator with the hole of the microscope
body. (Fig. 3)
7. Lock the fixing screw ⑥.
8. Install the head by aligning the round dovetail of the head
with the hole of the fluorescence epi-illuminator. (Fig. 4)
9. Lock the fixing screw ⑦.
①
④
Page 9
②
F ig. 1 F ig. 1
③
⑤
F ig. 2 F ig. 2
F F ig. 3 ig. 3
⑥
⑦
F F ig. 4 ig. 4