10. To tighten the Top Tether, take up any slack by pulling the free
end of the belt through the Top Tether adjuster (fig. 8.12). The
Top Tether will be correctly tightened when the green tension
indicator extends 1 mm (fig. 8.13).
11. Place the child in the seat.
12.Pass the diagonal section of the belt through the diagonal belt
guide
(C)
of the headrest. Pass the abdominal section of the belt
over the guides
pass over the guide
13.Pass the vehicle belt and buckle the vehicle seat belt until you
hear a click (fig. 8.16).
IMPORTANT! The part of the abdominal belt should rest as low as
possible over the child's hips, on both sides.
9. INSTALLING THE CHILD SEAT FORWARD FACING
GROUP 2/3
NOTICE
For installing the child seat with Isoclick Fix
follow the steps described in chapter 8.2 "Installing the seat",
avoiding the points 8, 9 and 10.
10.INSTALLING THE CHILD SEAT FORWARD FACING
GROUP 2/3
NOTICE
For installing the child seat with 3 points belt, follow the steps 1,
4,11,12 and 13, described in chapter 8.2 "Installing the seat".
(J)
(fig. 8.15). Make sure the diagonal belt section
(J)
nearest to the vehicle belt buckle.
(ISOCLICK FIX
AND 3 POINTS BELT)
®
GROUP 2/3 only. From 4 years to 12 years
approx. (15-36 kg)
(3 POINTS BELT ONLY)
GROUP 2/3 only. From 4 years to 12 years
approx. (15-36 kg)
and 3 points belt,
®
35