Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Turn the seat, and from below of the seat, take off the safety
buckle (F), by passing the retention plate through the seat base
slots (fig. 8.6).
6. Take out the safety buckle
8.2 Installing the seat
1. The seat must be in the number 1 recline position. (fig. 8.7).
Pull the lever
releasing the lever until the seat is in the 1 position.
2. Press the ISOFIX adjuster button
and pull them outward (fig. 8.8). Move each locking arm to check
that it is completely deployed.
3. Take the Top Tether
4. Place the child safety seat in the back seat of the vehicle facing in
the direction of travel.
5. Hold the safety seat with both hands and insert the two locking
arms
(N)
a click on both sides. The red button will change to green on both
sides (fig. 8.9).
6. Shake the seat to check that it is correctly anchored to the vehicle's
ISOFIX points.
IMPORTANT! The locking arms are only correctly fixed if both safety
buttons are green.
7. Push the safety seat towards the back using a firm, constant
pressure on both sides until it rests firmly against the vehicle seat
(fig. 8.10). If necessary, adjust the reclining of the vehicle´s seat
backrest to ensure that the child seat rests correctly.
8. Take the Top Tether and press the Top Tether
the strap.
9. Hook the safety clasp to the Top Tether anchor point recommended
in your vehicle instruction manual (fig. 8.11)
IMPORTANT! Make sure not to use the luggage clip instead
of the Top Tether anchor clip. Look for this symbol in your
vehicle.
34
(I)
forward and adjust the angle of recline without
(P)
and pass it over the seat.
into the vehicle´s Isofix connectors until they fasten with
(F)
and save it in the storage bag.
(M)
to unlock the Isofix arms
(P)
adjuster to stretch
(N)
Tabla de contenido
