Baby auto GIROTO 0123 Manual De Uso página 33

Loosen the security seats´shoulder straps the maximum as possible.
For it:
a. Loosen the harness straps
pressing the harness adjustment button
b. Adjust the headrest according to the child´s height by pulling the
headrest height regulator
of the child´s shoulder or slightly above (fig. 7.3).
1. Pressing the red button, release the buckle
the child (fig. 7.3).
3. Place the child in the seat.
4. Secure the child with the harness by joining the two
parts of the clasp and fasten the buckle until you hear a
click (fig. 7.4 and 7.5).
5. Gently pull the harness adjustment strap
correct tension (fig. 7.8). Remember that in order to ensure the
child's safety the harnesses should fit tightly.
8. INSTALLING THE CHILD SEAT FORWARD FACING
GROUP 2/3
NOTICE
8.1 Removing the 5 point harness and the safety buckle
Before installing the seat for Group 2/3, the seat harnesses (E),
harness protectors
1. Loosen the harness straps
the harness adjustment button
2. Loosen the harness straps from the back of the seat, freeing them
from the harness connector (R). Remove them pulling up from the
front side of the seat.
3. Take out the headrest brake and the shoulder protectors and
store them for future uses(fig.8.2 and 8.3)
4. Lift the cover and by folding the harness straps, store them in a
non disturbing place of the backrest (fig. 8.4)
(E)
(A)
(ISOCLICK FIX , TOP TETHER AND 3 POINTS BELT)
®
GROUP 2/3 only. From 4 years to 12 years
approx. (15-36 kg)
(D) and buckle
(E)
by pulling them gently while
(G)
(fig. 7.2).
adjusting the harness to the height
(F)
(H)
(F) must be removed. For it:
by pulling them gently while pressing
(G)
(fig. 7.2)
to help to install
to achieve the
33