BE Power Equipment B4014VTBA Manual Del Operador página 30

Engine runs then
stops
Rough running/
odd sound
PUMP TROUBLE SHOOTING
No water going
through pump
(with no hose/
gun attached)
Low water
pressure
Water not
getting through
the spray gun
Pressure
Fluctuation
30
Fuel is stale or
contaminated.
Leaking fuel.
Choke is still engaged.
Engine not at full throttle. Turn engine to full throttle (rabbit).
Air Filter Dirty.
Clogged Exhaust or Spark
Arrestor.
No water source
attached.
Water source is blocked.
Inlet filter plugged.
Low water inlet pressure. Ensure inlet GPM/LPM flow is
Partially blocked water
flow.
Gun Nozzle issue.
Gun Failure.
Water leaks in system.
Unloader not properly
adjusted.
Pressure hose not
connected to pump.
Hose obstruction.
Gun failure.
Spray nozzle plugged.
Partially blocked inlet
filter.
Inconsistent water
source.
TROUBLESHOOTING
Remove old fuel, replace it with
fresh fuel. May need to clean any
fuel valves, carburator or filters.
Inspect for leaks and repair.
Turn choke off.
Check air filter, replace if needed.
Clean or replace as needed.
Connect garden hose to pump.
Confirm water is flowing through
hose without obstruction.
Clean or replace inlet filter.
enough for pressure washer.
Ensure water flows through all
hoses and fittings.
Ensure nozzle is clean and right
size.
The gun is leaking or blocked,
may need to replace.
Locate water leak, and fix or
replace.
Tighten unloader.
Connect to pump.
Check for water through hose.
Clean or replace.
May need to replace gun,
especially if leaking.
Clean or replace spray nozzle.
Remove garden hose, ensure
filter is in place and clean.
Ensure gallons per minute flow
is enough for pressure washer.
www.bepowerequipment.com