BE Power Equipment B4014VTBA Manual Del Operador página 28

Oil Condition
First oil change
Then Change after
If oil is milky in color, then water has leaked into the crankcase. Further
inspections will be needed, including pump seals and ceramics plungers.
Fittings: Inspect for leaks and damage. Replace parts as needed.
WATER INLET FILTER
1. Inspect before every use
2. Rinse clean when dirty
3. Replace when damaged or leaking
28
PUMP MAINTENANCE SCHEDULE
Inspect before every use
25 hours
Every 250 hours of use, 12 months.
Inspection shows oil is dirty
MAINTENANCE
www.bepowerequipment.com