Gas Engine Stop Procedure - BE Power Equipment B4014VTBA Manual Del Operador

GAS ENGINE STOP PROCEDURE

In normal operation, to stop the engine:
1. Review all the safety warnings at the beginning of this manual.
2. Throttle down the machine.
3. While holding the spray gun trigger, turn off the engine. If you do not hold
down the trigger while turning it off, then trapped pressure may cause the
hose and spray wand fittings to seize.
4. Turn the fuel valve to the OFF position.
Emergency Stop: Switch the engine to the OFF position immediately. This will
stop the engine right away, but may trap pressure in the system, which may
prevent restarts or the ability to remove the hose or spray gun.
1. Turn off the water source, and squeeze the trigger again to release pressure
and water before disconnecting the hoses.
2. Drain the water out of the hoses before putting into storage.
www.bepowerequipment.com
∙ HONDA GX
∙ POWEREASE
∙ KOHLER SH270
Honda GC engine is
switched OFF when
the throttle lever is fully
lowered to the bottom.
Kohler CH440 is switched
OFF when the fuel valve
lever is moved all the way
to the left.
Vanguard engine is turned
off when throttle lever is
moved all the way to the
right.
23