Hose Connections - BE Power Equipment B4014VTBA Manual Del Operador

ASSEMBLY
5. Assemble the gun wand. The trigger assembly will be threaded onto the wand.
Hand tighten only.

HOSE CONNECTIONS

• Quick connect fittings: pull back the collar of the coupler, insert plug, and
release the collar. Tug on fittings to confirm a secure lock.
• M22 Fittings: Line up the insert and thread together so it is hand tight. Do not
overtighten.
• Spray Nozzles: To attach a spray nozzle to the end of the wand, pull back on
the collar of the brass fitting. Insert the spray nozzle and release the collar. Tug
on the nozzle to make sure it is secure. If it is loose, the high-pressure water
will launch it out and may cause injury or damage.
Your pressure washer will come with several colored spray nozzles that will have
different spray patterns and abilities.
0° Nozzle (Red)
15° Nozzle (Yellow)
25° Nozzle (Green)
40° Nozzle (White)
Black Soaper Nozzle
www.bepowerequipment.com
Concentrated stream to break apart baked-on mud
or dirt. Use with caution.
Narrow spray pattern that is aggressive and best used
on hard surface to remove tough dirt.
General purpose spray pattern. Slightly wider, but still
fairly aggressive.
Wider spray pattern for large areas or softer surfaces.
Low pressure nozzle. This is the only nozzle that can
be used with the chemical injector system.
19