Examples Of Helmet Types - TILSBERK DVISION Manual De Instrucciones

• "Mounting variant A: clamping in the helmet adapter with tabs" on page 19
• "Mounting variant B: gluing in the helmet adapter with tabs" on page 21
•
"Mounting variant C: using an adhesive pad to glue in the narrow helmet adapter" on page 24
• "Mounting variant D: using Sugru to glue in the narrow helmet adapter" on page 27
2. Place all materials from the delivery scope that are required for your mounting type on a clean,
level and well lit surface.
3. Thoroughly clean the mounting surface of your helmet. Follow the manufacturer's instructions
for doing so.
Installation preparation is complete.
3.2

Examples of helmet types

Helmets without sun visor
FIGURE 6 //
Gap in helmets without sun visors
1
Inner shell
2
Gap between inner shell and outer shell
3
Outer shell
4
Position of the helmet adapter with tabs (example)
Helmets without sun visors have a gap (FIGURE 6/2) between the outer shell (FIGURE 6/3) and the inner
shell (FIGURE 6/1), into which you can clamp the helmet adapter with tabs.
INFO
If none of the mounting variants match your helmet type, please contact
the manufacturer to discuss alternatives ("Manufacturer's contact details"
on page 1).
4
I N - H E LM E T I N STA L L AT I O N
3
2
1
EN
16